Graphene Ceramic Coating
Graphene Ceramic Coating
Graphene Ceramic Coating
Molecular-level brilliance and extreme hydrophobic defense.
Step into the future of surface preservation. Graphene Ceramic Coating cross-links with your vehicle’s clear coat at the molecular level, creating a semi-permanent, glass-like shield. This ultra-hard barrier repels water, dirt, and chemical contaminants with ease, keeping your vehicle cleaner for much longer. Formulated for a breathtaking, mirror-like shine, it reduces washing friction and provides an unparalleled liquid-gloss appearance.
Key Attributes:
-
9H Hardness Rating: Offers supreme resistance to micro-marring and chemical etching.
-
Extreme Hydrophobics: Self-cleaning properties force water and grime to instantly slide off the surface.
-
Deep Reflective Gloss: Enhances color saturation for a showroom-quality finish.
-
Longevity: Provides up to 5 years of durable protection with minimal maintenance.
| Product name | Graphene Ceramic Coating |
Paint surface must be clean, decontaminated, and free of oils, wax, or polish residue. Clay bar if needed. Work in a dust-free environment above 60°F.
Cut film to panel size with adequate overlap (minimum 1" on all edges). SDS film cuts cleanly — use a sharp blade and straight edge for best results.
Spray slip solution generously on both the panel and the adhesive side of the film. This gives you time to position and adjust without the film bonding prematurely.
Lay film onto the panel and begin squeegeeing from center outward. Work out all slip solution and air systematically. SDS film conforms without excessive force.
Tuck or trim edges to your preferred method. Apply heat gun on low to help film conform around curves and contours. Edges hold without lifting.
Allow 24–48 hours cure time before washing. Full adhesion is reached at 72 hours. Avoid high-pressure washing on edges for the first week.